Measurement after recognition (AASB116_08-15_COMPmar20_07-21)

An entity shall choose either the cost model in paragraph 30 or the revaluation model in paragraph 31 as its accounting policy and shall apply that policy to an entire class of property, plant and equipment.

After recognition as an asset, an item of property, plant and equipment shall be carried at its cost less any accumulated depreciation and any accumulated impairment losses.

After recognition as an asset, an item of property, plant and equipment whose fair value can be measured reliably shall be carried at a revalued amount, being its fair value at the date of the revaluation less any subsequent accumulated depreciation and subsequent accumulated impairment losses. Revaluations shall be made with sufficient regularity to ensure that the carrying amount does not differ materially from that which would be determined using fair value at the end of the reporting period.

[Deleted]

The frequency of revaluations depends upon the changes in fair values of the items of property, plant and equipment being revalued. When the fair value of a revalued asset differs materially from its carrying amount, a further revaluation is required. Some items of property, plant and equipment experience significant and volatile changes in fair value, thus necessitating annual revaluation. Such frequent revaluations are unnecessary for items of property, plant and equipment with only insignificant changes in fair value. Instead, it may be necessary to revalue the item only every three or five years.

When an item of property, plant and equipment is revalued, the carrying amount of that asset is adjusted to the revalued amount. At the date of the revaluation, the asset is treated in one of the following ways:

(a)            the gross carrying amount is adjusted in a manner that is consistent with the revaluation of the carrying amount of the asset. For example, the gross carrying amount may be restated by reference to observable market data or it may be restated proportionately to the change in the carrying amount. The accumulated depreciation at the date of the revaluation is adjusted to equal the difference between the gross carrying amount and the carrying amount of the asset after taking into account accumulated impairment losses; or

(b)            the accumulated depreciation is eliminated against the gross carrying amount of the asset.

The amount of the adjustment of accumulated depreciation forms part of the increase or decrease in carrying amount that is accounted for in accordance with paragraphs 39, Aus39.1, 40, Aus40.1 and Aus40.2.

If an item of property, plant and equipment is revalued, the entire class of property, plant and equipment to which that asset belongs shall be revalued.

A class of property, plant and equipment is a grouping of assets of a similar nature and use in an entity’s operations. The following are examples of separate classes:

(a)            land;

(b)            land and buildings;

(c)             machinery;

(d)            ships;

(e)             aircraft;

(f)             motor vehicles;

(g)             furniture and fixtures;

(h)            office equipment; and

(i)              bearer plants.

The items within a class of property, plant and equipment are revalued simultaneously to avoid selective revaluation of assets and the reporting of amounts in the financial statements that are a mixture of costs and values as at different dates. However, a class of assets may be revalued on a rolling basis provided revaluation of the class of assets is completed within a short period and provided the revaluations are kept up to date.

If an asset’s carrying amount is increased as a result of a revaluation, the increase shall be recognised in other comprehensive income and accumulated in equity under the heading of revaluation surplus. However, the increase shall be recognised in profit or loss to the extent that it reverses a revaluation decrease of the same asset previously recognised in profit or loss.

Notwithstanding paragraph 39, in respect of not-for-profit entities, if the carrying amount of a class of assets is increased as a result of a revaluation, the net revaluation increase shall be recognised in other comprehensive income and accumulated in equity under the heading of revaluation surplus.  However, the net revaluation increase shall be recognised in profit or loss to the extent that it reverses a net revaluation decrease of the same class of assets previously recognised in profit or loss.

If an asset’s carrying amount is decreased as a result of a revaluation, the decrease shall be recognised in profit or loss. However, the decrease shall be recognised in other comprehensive income to the extent of any credit balance existing in the revaluation surplus in respect of that asset. The decrease recognised in other comprehensive income reduces the amount accumulated in equity under the heading of revaluation surplus.

Notwithstanding paragraph 40, in respect of not-for-profit entities, if the carrying amount of a class of assets decreased as a result of a revaluation, the net revaluation decrease shall be recognised in profit or loss.  However, the net revaluation decrease shall be recognised in other comprehensive income to the extent of any credit balance existing in any revaluation surplus in respect of that same class of asset.  The net revaluation decrease recognised in other comprehensive income reduces the amount accumulated in equity under the heading of revaluation surplus.

Notwithstanding paragraph 40, in respect of not-for-profit entities, revaluation increases and revaluation decreases relating to individual assets within a class of property, plant and equipment shall be offset against one another within that class but shall not be offset in respect of assets in different classes.

The revaluation surplus included in equity in respect of an item of property, plant and equipment may be transferred directly to retained earnings when the asset is derecognised. This may involve transferring the whole of the surplus when the asset is retired or disposed of. However, some of the surplus may be transferred as the asset is used by an entity. In such a case, the amount of the surplus transferred would be the difference between depreciation based on the revalued carrying amount of the asset and depreciation based on the asset’s original cost. Transfers from revaluation surplus to retained earnings are not made through profit or loss.

The effects of taxes on income, if any, resulting from the revaluation of property, plant and equipment are recognised and disclosed in accordance with AASB 112 Income Taxes.

Each part of an item of property, plant and equipment with a cost that is significant in relation to the total cost of the item shall be depreciated separately.

An entity allocates the amount initially recognised in respect of an item of property, plant and equipment to its significant parts and depreciates separately each such part. For example, it may be appropriate to depreciate separately the airframe and engines of an aircraft. Similarly, if an entity acquires property, plant and equipment subject to an operating lease in which it is the lessor, it may be appropriate to depreciate separately amounts reflected in the cost of that item that are attributable to favourable or unfavourable lease terms relative to market terms.

A significant part of an item of property, plant and equipment may have a useful life and a depreciation method that are the same as the useful life and the depreciation method of another significant part of that same item. Such parts may be grouped in determining the depreciation charge.

To the extent that an entity depreciates separately some parts of an item of property, plant and equipment, it also depreciates separately the remainder of the item. The remainder consists of the parts of the item that are individually not significant. If an entity has varying expectations for these parts, approximation techniques may be necessary to depreciate the remainder in a manner that faithfully represents the consumption pattern and/or useful life of its parts.

An entity may choose to depreciate separately the parts of an item that do not have a cost that is significant in relation to the total cost of the item.

The depreciation charge for each period shall be recognised in profit or loss unless it is included in the carrying amount of another asset.

The depreciation charge for a period is usually recognised in profit or loss. However, sometimes, the future economic benefits embodied in an asset are absorbed in producing other assets. In this case, the depreciation charge constitutes part of the cost of the other asset and is included in its carrying amount. For example, the depreciation of manufacturing plant and equipment is included in the costs of conversion of inventories (see AASB 102). Similarly, depreciation of property, plant and equipment used for development activities may be included in the cost of an intangible asset recognised in accordance with AASB 138 Intangible Assets.

The depreciable amount of an asset shall be allocated on a systematic basis over its useful life.

The residual value and the useful life of an asset shall be reviewed at least at each financial year-end and, if expectations differ from previous estimates, the change(s) shall be accounted for as a change in an accounting estimate in accordance with AASB 108 Accounting Policies, Changes in Accounting Estimates and Errors.

Depreciation is recognised even if the fair value of the asset exceeds its carrying amount, as long as the asset’s residual value does not exceed its carrying amount. Repair and maintenance of an asset do not negate the need to depreciate it.

The depreciable amount of an asset is determined after deducting its residual value. In practice, the residual value of an asset is often insignificant and therefore immaterial in the calculation of the depreciable amount.

The residual value of an asset may increase to an amount equal to or greater than the asset’s carrying amount. If it does, the asset’s depreciation charge is zero unless and until its residual value subsequently decreases to an amount below the asset’s carrying amount.

Depreciation of an asset begins when it is available for use, ie when it is in the location and condition necessary for it to be capable of operating in the manner intended by management. Depreciation of an asset ceases at the earlier of the date that the asset is classified as held for sale (or included in a disposal group that is classified as held for sale) in accordance with AASB 5 and the date that the asset is derecognised. Therefore, depreciation does not cease when the asset becomes idle or is retired from active use unless the asset is fully depreciated. However, under usage methods of depreciation the depreciation charge can be zero while there is no production.

The future economic benefits embodied in an asset are consumed by an entity principally through its use. However, other factors, such as technical or commercial obsolescence and wear and tear while an asset remains idle, often result in the diminution of the economic benefits that might have been obtained from the asset. Consequently, all the following factors are considered in determining the useful life of an asset:

(a)            expected usage of the asset. Usage is assessed by reference to the asset’s expected capacity or physical output.

(b)            expected physical wear and tear, which depends on operational factors such as the number of shifts for which the asset is to be used and the repair and maintenance programme, and the care and maintenance of the asset while idle.

(c)             technical or commercial obsolescence arising from changes or improvements in production, or from a change in the market demand for the product or service output of the asset. Expected future reductions in the selling price of an item that was produced using an asset could indicate the expectation of technical or commercial obsolescence of the asset, which, in turn, might reflect a reduction of the future economic benefits embodied in the asset.

(d)            legal or similar limits on the use of the asset, such as the expiry dates of related leases.

The useful life of an asset is defined in terms of the asset’s expected utility to the entity. The asset management policy of the entity may involve the disposal of assets after a specified time or after consumption of a specified proportion of the future economic benefits embodied in the asset. Therefore, the useful life of an asset may be shorter than its economic life. The estimation of the useful life of the asset is a matter of judgement based on the experience of the entity with similar assets.

Land and buildings are separable assets and are accounted for separately, even when they are acquired together. With some exceptions, such as quarries and sites used for landfill, land has an unlimited useful life and therefore is not depreciated. Buildings have a limited useful life and therefore are depreciable assets. An increase in the value of the land on which a building stands does not affect the determination of the depreciable amount of the building.

If the cost of land includes the costs of site dismantlement, removal and restoration, that portion of the land asset is depreciated over the period of benefits obtained by incurring those costs. In some cases, the land itself may have a limited useful life, in which case it is depreciated in a manner that reflects the benefits to be derived from it.

The depreciation method used shall reflect the pattern in which the asset’s future economic benefits are expected to be consumed by the entity.

The depreciation method applied to an asset shall be reviewed at least at each financial year-end and, if there has been a significant change in the expected pattern of consumption of the future economic benefits embodied in the asset, the method shall be changed to reflect the changed pattern. Such a change shall be accounted for as a change in an accounting estimate in accordance with AASB 108.

A variety of depreciation methods can be used to allocate the depreciable amount of an asset on a systematic basis over its useful life. These methods include the straight-line method, the diminishing balance method and the units of production method. Straight-line depreciation results in a constant charge over the useful life if the asset’s residual value does not change. The diminishing balance method results in a decreasing charge over the useful life. The units of production method results in a charge based on the expected use or output. The entity selects the method that most closely reflects the expected pattern of consumption of the future economic benefits embodied in the asset. That method is applied consistently from period to period unless there is a change in the expected pattern of consumption of those future economic benefits.

A depreciation method that is based on revenue that is generated by an activity that includes the use of an asset is not appropriate. The revenue generated by an activity that includes the use of an asset generally reflects factors other than the consumption of the economic benefits of the asset. For example, revenue is affected by other inputs and processes, selling activities and changes in sales volumes and prices. The price component of revenue may be affected by inflation, which has no bearing upon the way in which an asset is consumed.

To determine whether an item of property, plant and equipment is impaired, an entity applies AASB 136 Impairment of Assets. That Standard explains how an entity reviews the carrying amount of its assets, how it determines the recoverable amount of an asset, and when it recognises, or reverses the recognition of, an impairment loss.

[Deleted]

Compensation from third parties for items of property, plant and equipment that were impaired, lost or given up shall be included in profit or loss when the compensation becomes receivable.

Impairments or losses of items of property, plant and equipment, related claims for or payments of compensation from third parties and any subsequent purchase or construction of replacement assets are separate economic events and are accounted for separately as follows:

(a)            impairments of items of property, plant and equipment are recognised in accordance with AASB 136;

(b)            derecognition of items of property, plant and equipment retired or disposed of is determined in accordance with this Standard;

(c)             compensation from third parties for items of property, plant and equipment that were impaired, lost or given up is included in determining profit or loss when it becomes receivable; and

(d)            the cost of items of property, plant and equipment restored, purchased or constructed as replacements is determined in accordance with this Standard.